AQUA’s Carburattor Cleaner removes quickly the deposits from the inside and outside of the carburetor to improve engine performance and fuel economy. It also effectively cleans all nonpainted metal parts, surfaces and choke valves from dirt and residues.

Keep away from battery terminals and electrical connections.

Directions of use:

1. Spray with can in upright position.
2. Insert plastic tube firmly into valve button. With engine off and cool.

Carburetor,

1. Remove the air cleaner.
2. Clean the outside of the carburettor and all the linkage. Avoid spraying electrical connections.

Manifold heat control,

1. Spray on exposed ends of cool heat riser shaft.
2. Allow to penetrate and clean.
3. Move counterweight up and down until free.

With engine running, Carburetor,

1. Spray to both ends of the choke valve shaft while working choke by hand.
2. Spray down and around the carburetor throat to remove deposits from the throttle plate area.

Do not spray down carburetor throat with engine off.

Do not spray below throttle plate.

Choke, If choke sticks, remove choke cover and spray.

PCV Valve, Disconnect the crankcase side of the valve and spray into the open end of the valve while working the plunger back and forth.

• Not recommended for fuel-injected vehicles.
• Will not harm catalytic converters or oxygen sensors.
• If sprayed on painted surface, wipe off at once.